Autowatch Ghost Immobiliser
The well-known Ghost Immobiliser provides your vehicle with a high level of protection against key cloning as well as theft, hacking and hacking. This TASSA-verified system is undetectable by thieves and blocks your vehicle from being started.
This silent device makes use of buttons on the steering wheel, center console, and on the door panels of your vehicle to allow you to create an individual PIN code that is that can be up to 20 characters that you must enter before the car will start.
Easy to install
With car crime increasing and cloning tools readily available, it is more essential than ever to safeguard your vehicle. Our Autowatch Ghost immobiliser provides a discrete, effective and aftermarket solution to guard against key-cloning and vehicle theft. The device is almost indestructible to thieves and operates through buttons on the steering wheel or door panels. This allows users to create a unique disarm sequence similar to credit card numbers that must be completed before the vehicle can begin or be driven away. This makes the system almost impossible to identify and is unaffected by spoofing or jamming devices as used with other systems available.
The installation of the Ghost unit is a highly skilled procedure that should only be carried out by an approved installer. The unit is carefully incorporated into your vehicle's CAN bus network which ensures that it is communicating directly with the ECU. The Ghost can be installed without altering factory settings, and it is not possible for thieves to evade the system with signal boosters.
Once the Ghost is fitted, a new and improved disarm sequence must be entered to turn on your vehicle. Press the service button 5 times in two seconds, but be sure you don't hold it down for too long. The system will flash twice to indicate that Transport Mode is active. This feature is great for classic, sports or luxury vehicles that have to have their security system temporarily disabled during transport or maintenance.
After Transport Mode has been activated the immobiliser is turned off and is not reactivated by entering your PIN code again. ghost immobiliser tracker is great for those who would like to store their vehicle during the winter months, and avoid being stolen by thieves, or being liable for monthly insurance premiums that increase.
There aren't any keyfobs, LEDs or other indicators to assist you in finding it.
The Ghost immobiliser is a discrete device that shields your joy and pride from thieves who steal cars by using buttons on the dashboard or steering wheel to enter an unobtrusive pin code prior the start of the engine. It wards off attacks using signal relays, ECU swapping and key cloning and can be linked to a phone application that allows remote arming and disarming. It is easy to install and can be put in a wide range of vehicles. It's also incredibly stealthy and can be hidden in a hard-to-reach place like behind the dashboard or in the steering wheel trim.
This is a great choice for vehicles with high performance since it will disable your vehicle's ignition if incorrect pin code is entered. This will stop thieves from driving away with your pride and joy. The device can send an alert to an iPhone if the vehicle is left unattended when in public. This provides peace of mind when you're away from your car.
In contrast to other immobilisers, the Ghost does not require additional fobs or LED indicators and can be concealed easily in a difficult-to-find place inside your vehicle. It is extremely resistant to detection since it directly communicates with the CAN data network of your vehicle. It does not emit radio signals, so it is inaccessible to RF scanners or signal jammers.
It's designed to be tamper proof and weatherproof, and can stand up to extreme temperatures. It is also difficult to tamper by cutting the wires or removing it. It's also unnoticeable by organised gangs of thieves who utilize diagnostics-reading equipment to detect security systems. It's not affected by professional diagnostic equipment that checks the CAN data to determine whether there is or absence of security systems.
No circuit cuts
Without LEDs or key fobs to give away its location the ghost device is hidden inside your car, beneath the dashboard or steering wheel and uses buttons in your car to make an unique PIN code that has to be entered before the engine can begin. The thief is unable to drive away the vehicle even if they have your keys because they don't know the correct code. The device also doesn't transmit radio signals, which means that organised criminal gangs that use diagnostics reading devices will not be able to detect the device.
This advanced immobiliser, that is also TASSA-approved, can assist you in reducing your insurance costs. This is especially relevant to vehicles that owners have customized. It also prevents key cloning theft, as well as ECU swapping. This means that the only way for a thief can steal your pride and joy is to remove it.
The system is completely silent since it does not use the buttons on the dashboard or factory keys. It communicates with the ECU by using the CAN data circuit which is completely silent and does not give any indication that it was installed. This means that a burglar cannot replace the ECU or even add new key fobs to allow your car started.
Should you ever forget your PIN code our engineers will have provided you with an emergency reset option for the device, which allows you to enter'service mode'. This allows the technician or dealer to temporarily start and drive your vehicle enabling them to carry out maintenance work, MOTs or valet parking without entering the PIN code a second time. Once the technician is finished or you have collected the vehicle and returned it to the dealer, enter the PIN to exit the service mode.
No radio signals
The Ghost immobiliser, in contrast to other car security systems is not dependent on an alarm system or key fobs to block vehicles from starting. Instead, it communicates with the vehicle's ECU and CAN data circuits to prevent the engine from starting. It is a discreet solution that isn't affected by key-cloning techniques or RF scanning that thieves use to get around security devices. It can be used in conjunction with tracking devices to increase the security of your vehicle. You will also be alerted when there is a chance to steal or alter the security of your vehicle.
The Autowatch Ghost, a TASSA certified device, is an insurance-approved and offers superior security against key hacking as well as the cloning. It utilizes a mobile app to control the device. It is encrypted to ensure security. It also has a safe emergency PIN override. It is a discreet effective and economical method to safeguard your vehicle from theft.
Ghost is not without problems. One common issue is that people struggle to find the correct disarm sequence. The device requires input via buttons already in your vehicle such as the ones on the steering column or console. Users might find this difficult to remember or get wrong particularly when the device is being used for the first time. It is advisable to read the instruction manual that comes with the device in order to comprehend this, and to practice the disarming procedure prior to driving the vehicle.
Another issue is that certain vehicles are experiencing issues with the CAN data connection, which can affect the functionality of the Ghost. This can be caused either by faulty sensors, or a damaged OBD connector. It is best to test the system before attempting to use it in the event of any issues with the CAN connection.
It is simple to change the PIN code
The ghost is an excellent device and has taken the market by storm however the process of changing the pin code is a bit hazy. The device is pre-programmed via the installer once it's fitted but sometimes customers might need to change this setting for a variety of reasons like they'd prefer to use a different button to deactivate the device, they don't want their installer to know, or they simply don't like their current pin code. It's simple to change your pin number. Follow the easy steps below to find out how.
Please note that you will need to turn on the vehicles ignition but do not start the engine! This process will take only just a few minutes. The vehicle will then resume normal operation.