Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN buses. It's subtle, doesn't have key fobs or LED indicators and is hidden within the wiring of the vehicle.
It also allows the user to temporarily disable the system by using Transport Mode for when they are renting their vehicle. This guide will take you through the installation process of the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car against key hacking attacks, cloning and relay attacks. The system is linked directly to the ECU of your car and secured by a PIN code you set. It is undetectable by thieves using diagnostic scanners and other modern methods. It is not able to be disabled using circuit cuts.
The system is easy to use, however professional installation is advised to ensure a perfect connection to the ECU of your vehicle. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complement your vehicle's protection package.
To avoid an accidental deployment of airbags or short circuits The installer must first remove your battery. Once the battery is disconnected, the installer may start working safely. Basic hand tools can be used to make precise connections. A multimeter is a great tool to verify electrical values. Cable ties and insulation tape are also essential for protecting connections and keeping wiring neat. Lastly, the user manual gives specific guidelines that are specific to the Ghost Immobiliser model you have.
During the installation, it is essential to choose the right grounding location that is free of paint and debris. The installer should ensure that the immobiliser's CAN H as well as CAN L wires are connected to the correct ports on the vehicle's ECU. These wires can be plugged into or soldered based on the model. A quality connector is recommended to ensure a long-lasting and reliable connection.
Transport Mode can be activated by the customer after the installation is complete. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The user must press the service icon on the dashboard five times within 2 seconds. After that, the system will confirm with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great option for those who rent their vehicles frequently through platforms like Turo. Immobilisers can lower insurance rates, as it decreases the likelihood of theft.
Getting Started
If you are looking for a solution that will safeguard your vehicle from theft it is best to go with an autowatch ghost immobiliser. It protects your vehicle from being started even when a criminal steals or copies the key. This is due to its advanced technology that is designed to stop the car's engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus network CAN which allows direct communication with the ECU. It uses the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your car. This is the best way to protect your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing a ghost immobiliser is a simple process, but it is important to follow the steps carefully to avoid electrical issues and system malfunctions. First, you need to locate and identify a constant 12V power source as well as an appropriate grounding point on the chassis of your vehicle. After that, you can begin to connect the wires for the immobiliser. Make use of high-quality connectors and soldering techniques to ensure an effective connection. Also, be sure to cover the connections with heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires are connected, you can connect the battery and then turn on the engine to test the immobiliser's function. Once everything is working properly, you can install it in a safe location beneath the dash or anywhere else in the vehicle. Make sure you hide it in a secure manner to prevent thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it meets the highest standards of security and is a fantastic deterrent to car thieves. It is resistant to hacking and key cloning and is not able to be disabled without the code. It is simple to use and can be set into a service valet setting so that your vehicle won't be activated if you take it for an MOT or servicing.
Wiring
ghost 2 immobiliser reviews is a cutting-edge security system designed to prevent vehicle theft. It connects directly to your car's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your vehicle. The Ghost Immobiliser does not interfere with the factory settings of your vehicle, unlike other aftermarket systems which require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanning devices. This is because the system doesn't send and receive radio frequency signals and it relies on the CAN data format to communicate with your ECU. It doesn't even require any modifications to your current key fobs.
Enter the sequence to disarm (either two or one button) and then turn on the ignition of your car to activate the Ghost Immobiliser. The indicator will flash twice to confirm that you have entered the correct code. Once you've verified this, you're able to start your vehicle and leave in peace.
Once installed, Ghost Immobiliser guards your vehicle from hacking or key cloning while also protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you have to hand your car to service or valet park.
You'll need a constant power source (12V) as well as an earthing point to complete the installation of the Ghost immobiliser. Make sure both are properly insulated and can be touched. Cable ties are also suggested for bundling and secure the wires. This will reduce the risk of theft by thieves. To avoid mistakes, make sure to double-check these points and mark them using labels or tape. Check every connection for signs that they are wearing out. Connections that are loose can cause problems with the system, so be sure they're securely in place and properly insulated. Don't forget to test the Ghost Immobiliser after installation is complete. This will confirm that the unit is working correctly and that all connections and insulation are safe. If you encounter any issues, you must be sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that integrates seamlessly into your car's ECU to prevent the engine from starting without authorization. Its innovative technology safeguards your vehicle from key cloning and hacking as well as other methods commonly employed by thieves to steal vehicles. The Ghost also works in tandem with other alarm and tracking systems to offer the best protection for your vehicle. The Ghost's unmatched features, combined with its subtle design makes it a sought-after choice for drivers who love cars and security-conscious drivers.
To ensure the proper integration of the Ghost Immobiliser, it's important to follow the steps of the installation procedure. Check the wiring diagram for the vehicle to help you locate and connect the wires. The next step is to determine the power and grounding sources. Once you've found them then you'll have to mark them in a way that they're easily identifiable during the installation process. It's important to use high-quality materials and tools. Basic hand tools can assist in making connections that are precise and a multimeter can verify electrical values and ensure safety. Cable tie and insulation tape will ensure that all connections are tidy. A Ghost-specific user's manual is also available.
Before you begin installing, it's important to test the system by entering the PIN code and then starting the vehicle. This will ensure that the immobiliser functions as intended and will stop vehicle starts that are not authorized. This step should be done regularly as part your regular inspections of your vehicle to ensure the system is always functioning properly.
After the installation is completed, you are now able to start driving your car with confidence. The Ghost will keep your pride and joy safe from potential thieves and ensure that nobody is able to take off with your vehicle without the correct PIN code. The Ghost can be linked to an approved Thatcham tracker that identifies any attempts to steal or tamper with. This allows you to track your vehicle if it is stolen.
The Ghost is compatible with a range of automobiles, including those from most major manufacturers. If you're looking to secure your vehicle with this cutting-edge device, call Monty's Locksmith today to learn more about our installation and service options. We are a TASSA Registered installer which guarantees that we adhere to strict guidelines and procedures for installing our products. This guarantees customers, insurance companies, and law enforcement agencies that all installations are carried out safely and properly.